Click image to view full size image
product description:
Strain Insulators and connecting terminal
In comply with ANSI, IEC, BS, AS etc standard;
* Brown or grey glazed;
* Advise Model No or supply drawing when enquire;
Factory Supply 11kv Pin Composite Insulator
Model No.: FPQ-11/6
Material: Silicon Rubber / Polymer
Rated Voltage: 11KV
One-minute power frequency withstands voltage, 50Hz, wet. (kV): 38KV
Lighting impulses withstand voltage, 1.2/50μs positive, dry. (kV): 95kV
Minimum Creepage distance (mm): 460mm
Minimum mechanical load (kN): 6kN
Standard: IEC61109
This series product are composed of silicon rubber for sheds/ housing, glass-fiber reinforced epoxy resin rod core and hop DIP galvanized metal fittings. It has good mechanical performance and electric performance compared with porcelain insulators.
We can offer OEM service according to customers' drawing and specified requirements, welcome to contact us.
For your reference under below is the main technical parameter of each model type.
Packaging & Shipping:
Packing: Packed by standard wooden case. at the bottom of the case is moistureproof linoleum, then covered with waterproof membrane.
Shipping: Within 15 workdays after order confirmed
Contact Us:
Contact Person: Ms Nora
Add: West of Shuichan street, Qiaoxi District ,Shijiazhuang City, Hebei Province, China
Strain Insulators and connecting terminal
In comply with ANSI, IEC, BS, AS etc standard;
* Brown or grey glazed;
* Advise Model No or supply drawing when enquire;
| type | 54-1 54-2 54-3 54-4 |
| standaed | ANSI IEC BS AS etc. |
| dimensions(mm) | h 89 108 140 171 d 64 73 86 89 |
| mechanical failing load,kn | 44 53 89 89 |
| low frenquency flashover voltage | dry,kv 25 30 35 40 wet,kv 12 15 18 23 |
| net weight each,apporx.kg | 0.5 0.65 1.2 2.2 |
Model No.: FPQ-11/6
Material: Silicon Rubber / Polymer
Rated Voltage: 11KV
One-minute power frequency withstands voltage, 50Hz, wet. (kV): 38KV
Lighting impulses withstand voltage, 1.2/50μs positive, dry. (kV): 95kV
Minimum Creepage distance (mm): 460mm
Minimum mechanical load (kN): 6kN
Standard: IEC61109
This series product are composed of silicon rubber for sheds/ housing, glass-fiber reinforced epoxy resin rod core and hop DIP galvanized metal fittings. It has good mechanical performance and electric performance compared with porcelain insulators.
We can offer OEM service according to customers' drawing and specified requirements, welcome to contact us.
For your reference under below is the main technical parameter of each model type.
|
Type |
System Voltage (KV) | Coupling Length (mm) | Leakage Distance (mm) | Dry Arc Distance (mm) | Electrical Ratings | Cantilever Strength KN | Spec. of Stud. | ||
| Power Frequency Flashover (KV) | Impulse Flashover KV | ||||||||
| Dry | Wet | ||||||||
| FPQ-11/4 | 10-15 | 225 | 320 | 130 | 67 | 53 | 71 | 4 | M16 |
| FPQ-11/6 | 10-15 | 245 | 460 | 180 | 79 | 63 | 99 | 6 | M16 |
| FPQ-11/10 | 10-15 | 245 | 460 | 180 | 79 | 63 | 99 | 10 | M20 |
Packing: Packed by standard wooden case. at the bottom of the case is moistureproof linoleum, then covered with waterproof membrane.
Shipping: Within 15 workdays after order confirmed
Contact Us:
Contact Person: Ms Nora
Add: West of Shuichan street, Qiaoxi District ,Shijiazhuang City, Hebei Province, China